I installed the frets using a hammer and an improvised c-clamp press for the higher frets. I used the following procedure:
1. Moisten the fret groove
2. Tap fret in with hammer
3. Higher frets were pressed in with a "C" clamp w/ a caul under the fret board.
The frets were leveled after installation.
1. Moisten the fret groove
2. Tap fret in with hammer
3. Higher frets were pressed in with a "C" clamp w/ a caul under the fret board.
The frets were leveled after installation.
Comments
Post a Comment